img_20140730_225220.jpg
<- zurück
img_20140730_225143.jpgweiter ->
plot_tip1.png
Front view of the prototype with LCD and the nob to adjust the temperature.

I used a CNC mill to make the holes and to engrave the scale for the temperature adjustment nob. The temperature can be adjusted from 200°C to 400°C. If you turn the nob below the 200 mark the heater is turned off.

img_20140730_225220.jpg
Zurück zur Übersicht

Exception abgefangen: Server is running in --secure-auth mode, but 'osm_gpx'@'localhost' has a password in the old format; please change the password to the new format

Exif Daten

Aufgenommen am30.07.2014 um 22:52
KameraGT-I9195
Belichtungszeit1/100s
Blendef/2.6
ISO80
Focal Length3.7mm
Map48.136398305556 N, 11.509942027778 E
Bildbeschreibung ändern

13:02:25 up 160 days, 21:51, 1 user, load average: 1.35, 0.96, 0.81
Current bandwidth utilization 0.12 Mbit/s